Printing reactive printing and pigment printing;Pigment printing including water slurry seal and mucilage printing again.Water slurry printing printed product generally feel is slightly worse than reactive printing, finished product and mucilage printing printed feels very stiff, generally used for the local ornament on the clothing, such as brooches, sleeve, etc. This article from the textile resources, each netizen directly in the browser, please direct input textile resource view.
1. The water slurry printing.Is the early application of printing technology.Material is water-based slurry, which is used to print pattern is similar to the pigment or dye with the painting.Through the study of the technology of screen printing process, so as to make a design of slurry can through to the fabric, and no pattern cannot penetrate, this figure can be printed on the fabric.Water slurry printing process is one of the most basic of silk screen printing industry printing process, it can be in cotton, polyester, hemp and so on, almost all of the light color printing on fabrics, can be widely applied.How it works Similar to dyeing, the difference is they have the fabric of an area "dyeing" as needed to take a color.So, this process of stainless steel wire mesh cannot be applied in deep color fabrics.Water slurry printing process the biggest advantage is widely used, spend a fastness is very good, can use relatively low price printed better effect.The limitations of water slurry printing process is cannot be applied on all dark fabrics.
2. Rubber paste printing.Mucilage printing is widely used in clothing, its advantage is that can produce a kind of special texture effect, elastic, feel is good, can in a deep impression on overprinting light color.Mucilage printing technology application of special chemical gel height seamless blend with dye. The dye through the gel medium. Strong adhesion on the fabric. Rubber paste printing process to overcome the limitations of the water slurry printing. Its characteristic is to adapt to all kinds of color depth and material printing,screen printing mesh can be in cotton, linen, viscose, polyester, polyamide, polypropylene and chlorofibre and all kinds of fiber blended fabric printing., can also be used in leather,. On the material such as leather printing, fluorescent printing, inkjet printing, can be with it rings printing. Electrostatic flocking printing. Printing process.Rubber paste printing process the biggest advantage is widely used, color bright, reductive degree is high, but its printing process relative water slurry printing process more complicated, cost is relatively high.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น